Top

2025 Bobcat ZT7061SP Zero-Turn Mower (ZT7000 61")

On Sale $12,100.00

Was $16,012.00

Sale: Save $3,912.00 now until 06/30/2025

Overview

New/Used New

Availability In Stock

LocationRex's Cycle Shop

Primary Colorwhite

Condition Excellent

Product Features

Dealer Notes

Choose financing as low as 0%* or applied factory rebate to cash sale price advertised*

May be shown with additional modifications and/or accessories sold separately
.
.
𝐖𝐡𝐢𝐥𝐞 𝐰𝐞 𝐦𝐚𝐤𝐞 𝐞𝐯𝐞𝐫𝐲 𝐞𝐟𝐟𝐨𝐫𝐭 𝐭𝐨 𝐩𝐫𝐨𝐯𝐢𝐝𝐞 𝐲𝐨𝐮 𝐭𝐡𝐞 𝐦𝐨𝐬𝐭 𝐚𝐜𝐜𝐮𝐫𝐚𝐭𝐞, 𝐮𝐩-𝐭𝐨-𝐝𝐚𝐭𝐞 𝐢𝐧𝐟𝐨𝐫𝐦𝐚𝐭𝐢𝐨𝐧, 𝐨𝐮𝐫 𝐰𝐞𝐛𝐬𝐢𝐭𝐞 𝐜𝐨𝐮𝐥𝐝 𝐡𝐚𝐯𝐞 𝐚 𝐮𝐧𝐢𝐭 𝐥𝐢𝐬𝐭𝐞𝐝 𝐚𝐭 𝐚𝐧 𝐢𝐧𝐜𝐨𝐫𝐫𝐞𝐜𝐭 𝐩𝐫𝐢𝐜𝐞 𝐝𝐮𝐞 𝐭𝐨 𝐭𝐲𝐩𝐨𝐠𝐫𝐚𝐩𝐡𝐢𝐜𝐚𝐥, 𝐩𝐡𝐨𝐭𝐨𝐠𝐫𝐚𝐩𝐡𝐢𝐜, 𝐨𝐫 𝐭𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐞𝐫𝐫𝐨𝐫. 𝐏𝐫𝐢𝐜𝐞𝐬 𝐨𝐧 𝐭𝐡𝐢𝐬 𝐰𝐞𝐛 𝐬𝐢𝐭𝐞 𝐚𝐫𝐞 𝐚𝐥𝐬𝐨 𝐬𝐮𝐛𝐣𝐞𝐜𝐭 𝐭𝐨 𝐜𝐡𝐚𝐧𝐠𝐞 𝐰𝐢𝐭𝐡𝐨𝐮𝐭 𝐧𝐨𝐭𝐢𝐜𝐞 𝐝𝐮𝐞 𝐭𝐨 𝐟𝐚𝐜𝐭𝐨𝐫𝐲 𝐫𝐞𝐛𝐚𝐭𝐞𝐬. **𝐈𝐟 𝐫𝐞𝐛𝐚𝐭𝐞 𝐢𝐬 𝐚𝐯𝐚𝐢𝐥𝐚𝐛𝐥𝐞, 𝐢𝐭 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐢𝐧 𝐥𝐢𝐞𝐮 𝐨𝐟 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐟𝐢𝐧𝐚𝐧𝐜𝐢𝐧𝐠 𝐩𝐫𝐨𝐦𝐨𝐭𝐢𝐨𝐧𝐬.

𝐂𝐚𝐥𝐥 𝐬𝐚𝐥𝐞𝐬 𝐚𝐭 (𝟐𝟕𝟎) 𝟑𝟖𝟒-𝟔𝟎𝟏𝟖 𝐭𝐨 𝐜𝐡𝐞𝐜𝐤 𝐨𝐧 𝐚𝐯𝐚𝐢𝐥𝐚𝐛𝐢𝐥𝐢𝐭𝐲 𝐚𝐧𝐝 𝐜𝐨𝐧𝐟𝐢𝐫𝐦 𝐩𝐫𝐢𝐜𝐢𝐧𝐠 𝐨𝐮𝐭 𝐭𝐡𝐞 𝐝𝐨𝐨𝐫. 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐛𝐥𝐞 𝐬𝐚𝐥𝐞𝐬 𝐭𝐚𝐱 𝐚𝐧𝐝 𝐭𝐢𝐭𝐥𝐞 𝐟𝐞𝐞𝐬 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥

Description

High-performance engine

Commercial-grade transmission

Comfortable command center

High-capacity dual fuel tanks

High-speed mowing

Featuring the AirFX™ Cutting Deck

Overview Features

Built to boost your bottom line, the ZT7000 zero-turn mower is the peak of toughness and best-in-the-business performance. With transport speeds up to 19 mph and mowing speeds up to 13 mph, you can knock out quality results, job after job. With features like a heavy-duty drive system, industry-leading cutting technology and powerful engine options, you get major commercial-grade power that’s a cut above the rest.
Shift to a whole new degree of performance with the Hydro-Gear ZT-5400 hydrostatic transaxle drive system. It features a 2-speed foot pedal and delivers maximum output and torque.
With two engine options and up to 38.5 horsepower, the ZT7000 delivers major power and pro-grade performance.
The science behind the perfect cut is defined by the AirFX™ zero-turn mower cutting deck. Built to tackle all turf types, it features a deep, bullnose design that increases vacuum, lifting grass up to the cutting blade for a superior quality of cut and a better-protected cutting deck.

Key Specifications

Mower Deck: AirFX™ Cutting System
Width: 61 in
Cutting Height: 1.5-5.5
Engine Model: Kaw FX1000V
Displacement: 999 cc
Transmission type: HG ZT-5400 2-Speed Hydrostatic Transaxles
Pump Displacement: 16 cc

Deck

Mower Deck: AirFX™ Cutting System
Width: 61 in
Cutting Height: 1.5-5.5
Blade Tip Speed: 18,500 ft/min
Discharge Chute: Flexible Molded Polymer

Engine

Engine Model: Kaw FX1000V
Displacement: 999 cc
Fuel Capacity: 15 gal
Horsepower: 35 hp

Performance

Weight: 1,500 lb

Transmission

Transmission type: HG ZT-5400 2-Speed Hydrostatic Transaxles
Pump Displacement: 16 cc
Oil Capacity: 5.2 qt_liq_us
Forward Speed: 13 mph
Reverse Speed: 5 mph

Electrical

Charging System: 15 A
Clutch: 250 ft·lbf

Frame

Front/Rear: Welded 0.25 in, 7-gauge Steel; 1.5 x 2.5 in Steel Tubing
Length: 87 in

Wheels

Drive Wheel: 26 x 12.0-12, 6-Spoke
Front Caster Wheel Size: 15 x 6.5-6, No-Flat
Caster Arm Attachment: Bolt On

Seat

Seat: Extra-High Back, Full-Mechanical Suspension Seat
Fore-Aft Adjust: Seat Slide Lever

NOTES:

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.